Digital Breathalyzer with LCD Display

Digital breathalyser with LCD display DBAT04

Don't risk your life, your licence and your money if you have been drinking alcohol, wait until it is out of your system. The best way to monitor this is to choose a digital breathalyser. Wait 20 minutes after drinking alcohol, as this is the time it takes for the alcohol to be absorbed.Do not repeat the measurement at intervals of less than 3 minutes.This breathalyser can measure without a nozzle by blowing on it.

Setup and use:

Slide down the battery cover on the back of the device, insert 2 AAA batteries and slide the cover back on.

Press the "POWER" button on the unit and wait 10 seconds for the probe to warm up "WARM UP". When the device displays "BLOW", you have 10 seconds to blow into the device.

You are done with the measurement and if you have done everything right and have not drunk alcohol, all the values on the device will be 0 and then it will automatically switch off after 10 seconds.

Warning:

• Wait about 20 minutes after drinking alcohol, as this is the minimum time needed for the alcohol to be absorbed from the digestive tract into the bloodstream and cleared fromthe mouth.
• For more accurate results, do not repeat the test at intervals of less than 3 minutes.
• Do not eat or smoke for at least 20 minutes before the test.
• Do not use chemicals to clean thebreathalyser.
• Do not spray alcohol on thebreathalyser sensor.
• Do not use chemicals (paint, pesticides, alcohol) in the immediate vicinity of thebreathalyser.
• Do not keep the breathalyser in an enclosed space with polluted air.
• The measured values are for information only and the manufacturer accepts no legal liability in this respect.